2.2 Install Reader

1) Find the installation position of reader.

2) Remove the cover plate at the back of control cabinet by using nut driver.

3) Prepare reader, 4 screws(M4*12), screw driver and reader mounting plate.

4) Tighten 4 screws to attach the reader on its mounting plate.

5) Place the reader into mounting hole.

6) Prepare 4 nuts(M4) and nut driver.

7) Tighten 4 nuts to attach the reader on the machine.

8) Find the MDB convert cable inside the plastic bag.

9) Plug one end of the MDB cable to the reader and another end to the machine.