Document Overview
This guide provides instructions on Bill Acceptor Locks and Hooks on the Cash HS Kiosk (including install the bill acceptor lock on the bill acceptor plate and install the lock hook). It is hoped with this document you can know how to install the bill acceptor lock on the bill acceptor plate and how to install the lock hook.
1. Install the Bill Acceptor Lock on the Bill Acceptor Plate
1.1 Parts Preparation
No. | Required Parts | Quantity | Picture |
|---|---|---|---|
1 | Bill Acceptor Cover Plate | 1 |
|
2 | Bill Acceptor Lock | 1 |
|
1.2 Process Instruction
1) Take the bill acceptor cover plate out. | 2) Remove the spacer and hexagonal nut from the bill acceptor lock as shown in the picture. |
|
|
3) And then insert the lock into the top lock hole of bill acceptor cover plate. | |
|
|
4) Put the spacer through the lock shaft as shown in the picture. Please note that the pinpoint side of the spacer must face upwards. | |
|
|
5) Screw the spacer with the hexagonal nut. | 6) Front view for reference. |
|
|
2. Install the Lock Hook
2.1 Parts Preparation
No. | Required Parts | Quantity | Picture |
|---|---|---|---|
1 | BLock Hook | 1 |
|
2 | K-Lock Nut | 1 |
|
2.2 Process Instruction
1) Install the lock hook on the lock shaft as shown in the picture. | |
| |
2) Screw the lock hook with a K-lock nut. | |
|
|
