Cleaning and Maintenance

Cleaning and Inspection Schedule

Cleaning Tips

1. When the machine is dusty, wipe it with a dry cloth.

2. If the dirt is severe, use a cloth dampened with water or a diluted neutral detergent solution for cleaning.

3. Do not use organic solvents, acids, or alkaline liquids to clean the machine, as they can damage the panel and cause it to crack.

4. Do not use chemical solvents like paint thinners or banana water to clean the vending machine, as they can cause safety hazards..

5. Clean the evaporator and condenser with water on a monthly basis. If necessary, rinse with water (refer to the "Refrigerator Cleaning Guide" sticker on the machine for detailed instructions).

6. To clean the dust from the machine, open the door, disconnect the power plug, and remove the bezel or cargo bucket. Then, use a non-metallic brush to clean along the radiator gap.

Leakage Protection

1. Press the test button on the power plug. The power indicator is off and at the same time, the machine should power off. Perform this test every month.

2. If the test result is normal, wait for 3 minutes before pressing the plug switch to turn on the power.