Summary
This article will show how to configure Count-up mode with Dixmor LED 7 timer by showing the wiring and the profile building.
Issue
Configuring Count-up mode with Dixmor LED 7 timer.
Environment
Brand: Dixmor
Model: LED7
Resolution
Package Number | Package Name | Package Content |
|---|---|---|
PK210001 | Ultra Pulse Package |
|
Before wiring
Set the Dixmor Timer's programming mode to CREDIT or BOTH mode for Count up, per Dixmor programming manual.
The pulse wire (blue) must be connected to pin 9.
The Card Reader should have the next connections:
Login to the CCM and set the Ultra Pulse profile by selecting the 'Machine Data' → 'Kiosoft' → 'Ultra Pulse' (note that the Pre Auth amount will be the max amount charged).
Requirement
Pulse Output must be set to RELAY ON for Count Up.
Then, select advanced options.
Set the time per pulse to match what is configured on the timer.
