Alliance ACA Error Codes

Prev Next

Following is a list of possible error codes for an electronic control. Errors beginning with , refer to external device Infra-red communication errors. Errors beginning with refer to card reader errors. All other errors refer to machine errors.

NOTE: Fatal Errors will show along with the error on the display.

Error Codes

Display

Description

Cause/Corrective Action

Transmission Failure

Communication failure. Re-aim external device and try again.

Time-out Error

Communication failure. Re-aim external device and try again.

Invalid Command Code

Communication successful, but the command was not valid for this machine type, or the control could not perform the command in its current mode of operation. Ensure data is for current machine type and control is in correct mode.

Expecting Upload

Request

Communication failure. Re-aim external device and try again.

Invalid or Out-of-

Range Data

The value in at least one of the programming options is invalid or out of range. Recheck the programming option's value and try again.

CRC-16 Error

Communication failure. Re-aim external device and try again.

Framing Error

Communication error. Re-aim external device and try again.