How to Rapid advance an Alliance machine

Prev Next

Issue

Environment

How to Enter Rapid Advance from Ready Mode

Note:

Control must be put into Manual Mode. Refer to Entering Manual Mode.

Please reference to the owner manual of your particular laundry machine for detailed instructions.

The following is a quick guide. Use the table below to navigate the programming menu.


1) Enter service mode by unplugging the bullet plug connected to the board. Located between the “white/black” and “red/blue” wires. If this is a stack machine, there is a bullet plug on each side.

Two white connectors are shown connected to a circuit board with colorful wires.

2) Once the bullet plug is removed, hold the service switch in the back of the coin vault.

A person holds a black component with wires, possibly an electrical part or connector.

3) Press and hold the LIGHT and NORMAL keypad. Note: All Alliance Machine select - Top two LEFT Buttons).

4) Press the DELICATES (Up) or COLD (Down) to scroll through the options until the desire options appears (rAPid).

5) Press the START (enter) Keypad to start cycle.

Control panel of a washing machine with highlighted start button and settings options.

Note:

The Rapid Advance option must be turned on for Rapid Advance to Work.

6) Then continuously press the START button until the time decreases to zero.

Washing machine control panel displaying settings for soil, cycle, and temperature options.

Washing machine control panel displaying settings for soil, cycle, and temperature options.

Washing machine control panel displaying settings for wash, rinse, spin, and temperature options.

7) Open and Close door

Washing machine control panel displaying options for soil, cycle, and temperature settings.

A washing machine lid with warning labels and a QR code for safety information.

8) The laundry machine will return to normal

Washing machine control panel displaying settings for soil, cycle, and temperature options.