Quantum Touch Programming into CARD mode

Prev Next

Summary

Setting a Speed Queen Quantum Touch machine into card mode, this is also called Huebsch Command on that brand of equipment.


Issue

Changing Alliance Quantum Touch controlled machine board's programming into CARD mode


Environment

Using an Alliance Quantum Touch controlled machine board and a KioSoft Card Reader


Resolution:

1) To access the “System Menu”, touch and hold, for 3 seconds, the center of the menu header on the display with the service door open and, for coin models, the coin vault closed

Quantum Touch CARD Mode Step 1

2) Once in the System Menu, Touch SETTINGS from the display to enter the Settings

Menu. Image below shows this option at the bottom of the screen.

Quantum Touch CARD Mode Step 2

3) Afterwards press on "Vend Settings."  

Quantum Touch CARD Mode Step 3

4) Press on “Payment Options” & enable “Card Reader”.  

Quantum Touch CARD Mode Step 4

5) Scroll down under the Payment Settings page and make sure to enable Serial Payment System

Quantum Touch CARD Mode Step 5

6)  After modifications are complete, touch EXIT to access the "Save Changes" Menu. Then touch "SAVE AND EXIT" to save changes and exit the current menu.

Quantum Touch CARD Mode Step 6