Creating a Common Pulse profile
Please note when using a Common Pulse profile:
You must set the price and cycle time on the board.
Multi-tier pricing is not available with Common Pulse profile.
Under CCM, in the Profile Builder Select the following for Machine Data
Select “CommonPulse”
Select “Washer” or “Dryer”
Enter the desired Vend Price & Cycle Time. Value must match settings on machine board.
When using a CommonPulse Profile, the Cycle Time is the amount of time the reader will not accept payment, once the machine is in use. Please make sure to change the cycle time as needed.
After, click on "Advance Options" enter the following pulse setting.
Pulse Output = Relay ON
Relay ON Time= 35 seconds
Leave all other setting as default
Wiring Instructions: Whirlpool (Green Button) with CommonPulse ®2023 KioSoft Technologies
Once machine values are configured, click on “Site Data” and enter location information.
Site Code and Location ID must match the location in Location Management on Laundry Portal
For Location ID and Room#, you should enter the ones that you created previously
See image below regarding Site Data’s field values.
Location ID
Site Code
Room Number
Each room will get its own profile.
Non-Network
This should be enabled any time a modem is not present in the room.
Card Holder
Hide Label
This will hide the machine number on Connect and Elevate readers
If applicable, for Payment Options, ensure you select the payment methods for the desired location.
Finally, select “Save Profile” from the drop-down menu and click “Save”
Enter “Custom Text” for easier identification in the KioSoft Laundry Manager Application.
Example of Custom Text Label: Location Name RM1 Whirlpool Dryer [225/45mins]
