Summary
This article will show how to wire each component of the PK140001 package into the Whirlpool Electromechanical Washer step by step.
Issue
Wiring the Whirlpool Electromechanical Washer with PK140001.
Environment
Whirlpool Electromechanical Washer.
Resolution
Package ID | Package name | Package list |
|---|---|---|
PK140001 | CleanReader Installation Kit - Whirlpool Electromechanical - Washer (excl. Ultra) |
|
Connect the WH140007's power cable (black and white connection) into the whirlpool machine.
Locate the black and white cable on the machine board and splice in the single red lead from WH140007.
The red cable
This cable will energize the mechanical timer and monitor the status of the machine based on the voltage.
Plug the card reader’s data cable into the card reader connection.
Connect the Kiosoft harness’s female red and white spades into the coin slide’s connections (if keeping the coin slide).
Coin slide
If you do not have the connection, and you plan on keeping coin, you will need to order this coin slide part from Whirlpool.
For a Whirlpool machine, using relay pulse, the card reader's jumper on the back must be moved over to the “B” side.
Jumper’s pins
The jumper’s pins need to be horizontal and not vertical. The jumper has two parts, each covers two pins. Make sure both pieces are moved closer to the right "B" side.