Summary
How to create a Universal Pulse profile for an LG machine
Issue
How to create a Universal Pulse profile for an LG machine
Environment
LG Washer, PK170009, WH170010
Resolution
1. Under CCM, in the Profile Builder, Select “Universal” then “Universal Pulse”.
2. Click on each tab and enter information in order.
Starting with "Location” tab, enter location information.
3. In "Machine Profile” tab, change the following:
Machine Type: Washer
Reader Mode: Value
Pocket Configuration: Single
4. "Audio Visual" tab can be left as default.
5. "Products, Pricing and Timing” enter desired pricing:
Note: Time & Price must be set on the machine board as well. There are three different methods to get pricing: Basic, Incremental, and Multi Pricing. Fill out one tab only and then click on "Pulse" tab.
Example below shows Basic:
6. Once completed, under the “Pulse” tab enter the following pulse setting for an Encore Dryer:
Output Type: RelayPulse
Pulse Polarity: Idle Open
Output Pulse Gap: 150
Output Pulse Duration: 60
Laundry Available Signal: Disable
7. Proceed to fill out the following tabs as needed “Data Processing.
Payment Gateway Options: TSYS
POS ID: (from VAR sheet provided)
Auth Code: (from VAR sheet provided)
Auth Factor: (from VAR sheet provided)
Work Mode: Retail (unless using Standard Mode (MASTER/BACKUP/NORMAL), then create as NORMAL)
Wifi SSID: techtrex (unless otherwise specified)
“Payment Types and Methods” enter desired payment options and change "SiteCodeCheck" to ENABLE.
8. Finally, go to the drop down labeled "Profile and switch to “Save Profile".
Enter “Custom Text” for easier identification in the KioSoft Laundry Manager Application.
Example of Custom Text Label: Location Name RM1 LG Washer ($2.00).
Click the “Save” button. The following notification will show up:
