Environment:
The following article applies to Wascomat Crossover washers being pulsed.
The Wascomat Crossover Washer may be pulsed in cases where both a coin and a card reader are used. Since the Crossover washer is not a dual channel machine, it is recommended for the best end user experience with the card reader system to set the machine to COIN mode and use the universal pulse settings provided below.
If using only the KioSoft card reader system without coin as an accepted form of payment, the serial communication profile is recommended instead.
Example Laundry Model: WHLFP817M
1) Under CCM, in the Profile Builder, Select “Universal” then “Universal Pulse”.
2) Start on the left side of the tabs and work your way to the right as you fill in information.
Starting with "Location” tab, enter location information.
3) In "Machine Profile” tab, change the following:
Machine Type: Washer
Reader Mode: Value
Pocket Configuration: Single
4) "Audio Visual" tab can be left as default.
5) "Products, Pricing and Timing” enter desired pricing:
Note: Time & Price must be set on the machine board as well. There are three different methods to get pricing: Basic, Incremental, and Multi Pricing. Fill out one tab only and then click on "Pulse" tab.
Example below shows Basic
Reminder
The pricing on the reader and machine must match. Please make sure the machine is set for COIN mode and the pricing is set on the laundry machine as well.
6) Once completed, under the “Pulse” tab enter the following pulse setting for an Encore Dryer:
Output Type: CoinPulse
Pulse Polarity: Idle Close
Output Pulse Gap: 100
Output Pulse Duration: 40
Laundry Available Signal: Disable
7) Proceed to fill out the following tabs as needed “Data Processing”, based on type of reader.
Payment Gateway Options: TSYS
POS ID: (from VAR sheet provided)
Auth Code: (from VAR sheet provided)
Auth Factor: (from VAR sheet provided)
Work Mode: Retail (unless using Standard Mode (MASTER/BACKUP/NORMAL), then create as NORMAL)
Wifi SSID: techtrex (unless otherwise specified)
8) In “Payment Types and Methods” enter desired payment options, based on reader model type.
9) Finally, go to the drop down labeled "Profile and switch to “Save Profile". Then click the “Save” button.
Enter “Custom Text” for easier identification in the KioSoft Laundry Manager Application.
