Part ID | Image |
|---|---|
LG Dryer control panel |
|
After filling out the 'Site Data' tab with the information for your test location, select the 'Machine Data' → 'LG' → 'Washer 1.8':
Er34
If the wrong machine profile is loaded, the reader will give a "Cerrer" or “Er34" message. If you are not sure which protocol to use, refer to the chart provided below.
Model # | Card Protocol Version 1.8 | Model # | Card Protocol Version 1.7 |
GCWM1069**7 | 1.8 | GCWF1069*** | 1.7 |
TCWM2013*** | 1.8 | GCWL1069*** | 1.7 |
GDL1329*G**7 | 1.8 | TCW2013*** | 1.7 |
GDL1329*E**7 | 1.8 | GDL1329*G** | 1.7 |
GDL1329*E** | 1.7 | ||
GDP1329*** | 1.7 |
Click on the 'Advanced Options' button to view all machine parameters:
Configure machine parameters/fields as needed: Enter desired Vend Price, where 100 = $1.00.
Set the Cycle Time:
Standard Time
Industry standard is: Electric Dryer = 60 min, Gas Dryer = 45 min.
Set the Top-Off Price (value in cents), and Top-Off Time (value in minutes). Then chose to enable top off by checking on the "Top Off Enabled" option near features.
Top Off Time
The default top off time set on the LGs machine board is 5 minutes.
Save your profile by selecting the drop-down option at the top left of the profile builder, and choose the 'Save Profile' option.
Then enter the custom text and click on the "Save" button.
