LG Dryer Error Codes

tE1 Error Code

A tE1 error code on the display of the dryer indicates a problem was detected with the dryer’s thermistor. If the tE1 error code is showing on the dryer’s display:

1. Unplug the dryer, or trip the circuit breaker supplying to the dryer.

2. While the dryer remains without power, press and hold the START/PULSE button for 5 seconds.

3. Restore power to the dryer and attempt to run another cycle.

Repair Service

If the tE1 error code occurs again after resetting the dryer, the unit may require repair service.

tE2 Error Code

A tE2 error code on the display of the dryer indicates a problem was detected with the dryer’s thermistor, normally during cold conditions. The extra humidity in the dryer’s vent during the SteamFresh^TM, Steam Sanity^TM, or the Steam cause the duct to cool down faster, resulting in the dryer displaying the tE2 error.

If the tE2 error code is showing on the dryer’s display during the SteamFresh^TM, Steam Sanity^TM, or the Steam option:

1. Power the dryer on.

2. Select the SteamFresh^TM Cycle.

3. Press the MORE TIME button until big is shown in the display.

4. Press the START button.

Repair Service

If the tE2 error code occurs again after resetting the dryer, the unit may require repair service.