V8 Coin Chute User Guide

Prev Next

V8 Coin Chute

User Guide

This guide provides you with instructions on how to perform Vend Price Change-Over.

Note:

This process will work for Slides with or without a Switch Kit attached to the Slide, there is no need to remove it to change the price.

  1. Remove the two Slide Springs.

  1. Insert coins and push the slide forward to the end of travel and hold it in that position.

  1. Remove the two Buffer Plate screws while holding the Buffer Plate in position so it doesn’t fall out.

  1. Turn V8 over to expose underside.

  1. Remove Buffer Plate and Block out key to match sticker of new vend price.

For example, if you are going to change the vend price to $2, you should remove all the Block Out Keys as the sticker indicates.

  1. Replace Buffer Plate and two screws. (the word UP should be visible on the Buffer Plate)

  1. Return the slide to the original position and attach the two Slide Springs.

  1. From the Vend Price Change Kit, adhere the Price and Coin stickers over the existing stickers.

  1. Test new pricing with coins.

  1. Mount the Coin Chute to the machine.