AVU Touch Tablet Software Installation

Prev Next

After the kiosk is powered on, you may need to perform the following settings to use the tablet. Some of the steps may not be required, like switching language/time zone, if they have already been conducted.

Follow the steps below to install the software on the AVU tablet.

1) Tap the menu button at the bottom.

2) Tap to select the Lightning app.

3) Tap the green button, which means “Install”.

4) Tap “DOWNLOAD” on the pop-up window.

5) You will see an icon for downloading at the upper-left corner of the screen. Swipe it down to display the downloading content.

6) Tap to select the AVU Touch software.

7) Tap “INSTALL” at the bottom of the pop-up window.

8) Tap “OPEN” on the App Installed page.

9) Tap “ALLOW” to give the software relevant permissions.

10) Enter the SRC, then tap “Submit” to enter the Admin Menu of the AVU Touch software.

11) There are five major functions at the present stage in the Admin Menu: About, Key Injection and Profile Upgrade, Reset Card Count, and Exit.

The Key Injection and Profile Upgrade need to be configured. Please refer to the document ”Profile Upgrade and Key Injection” for detailed steps.

INTENTIONALLY LEFT BLANK

INTENTIONALLY LEFT BLANK

AVU Tablet Software Installation (via USB)

Go to the link provided to download the software AVUTouch-V1.0 to a USB disk.

URL: AVUTouch-v1.6.0.0-41-release-20240614101956.apk

1. Connect the USB disk to the touch screen via the USB port at the bottom of the screen.

2. Tap the icon at the bottom of the touch screen as marked out.

3. Tap "APKinstaller".

4. Tap the "Install" button.

5. Tap to select "USB Memory".

6. On the right side of the screen, tap to select the AVU Touch software.

7. On the pop-up page, tap "INSTALL" located at the bottom.

8. Tap "OPEN" after the software is installed.

9. Tap "ALLOW" to authorize permissions.

10. The software installation is completed.