Download Station – Error Codes List:
“NULL” – Download Station is in init mode, it should be do NMS Update first
“----” - please setup the target reader type via KLM
“DLFL” - Firmware of Target Reader download failed, download firmware again via KLM
“Erro” - Upgrade Firmware to Target Reader Failed, Plug out to stop beep.
“FInI” - Upgrade Firmware to Target Reader Success, Can Plug out target reader.
“-_-_”and “_-_-” – Plug In Ultra, wait ultra family power on
“Updt” – Plug In Target Reader, start to download firmware
“00”~”100” – Upgrade firmware percentage
“E-XX” - Upgrade Firmware to Target Reader Failed At XX (Range:0~99) Percentage
“Er01” - Connect to WIFI Failed
“Er02” - Connect to TMS Server Failed
“Er03” - Send to TMS Server Failed
“Er04” - TMS Download Fail
“Er05” - TMS Firmware Download LRC Error
“FULL” – Flash is not enough, please verify the reference number. Reboot manual.
“Er11” - The Reference Number of CleanReader Solo Connect and Connect is null.
“Er12” - The Reference Number of CleanReader Solo and Prime is null.
“Er13” - The Reference Number of CleanReader Converter is null.
“Er14” - The Reference Number of Ultra is Null
“Er15” - The Reference Number of Ultra V2 is Null
“Er16” - The Reference Number of Ultra One is Null
“Er20” - Target Reader is still Plug In when Setup Download Reader.
-IFI - Downloading update (Usually happens every day at 9:00 am)