Support Gameboard 2.0
Gameboard 2.0 is supported on Elevate Touch when multiple payment media or eTickets are needed. You may follow the instructions below to get aware of the installation and deployment of this functionality.
a. Connect Gameboard to Reader
Connect the Elevate Touch 20-pin cable to the Gameboard V2 via the cable (No PN) below with two splits.
b. Deploy Gameboard on CCM
You can deploy the Gameboard by logging in to your vendor portal account and clicking on CCM. Then you can click on the “Profile” drop-down menu and select “Load Profile” to search the reader’s profile that was created. Then you can select Universal -> Universal Pulse to check the profile details.
To support Gameboard for the reader, you should go to the “Machine Profile” tab and select “Hardware Interface” as “Gameboard Version 2” After that, you can go to the “Pulse” tab and refer to the screenshot below to perform the suggested Pulse configuration. You can go to “Ultra Series Readers” → “Gameboard Version2” → “Gameboard Version 2 Deployment Instructions” to find out the descriptions about each field under the “Pulse” tab.
