How to adjust the coin lock settings on a Continental Girbau Profit Plus

Summary

Adjusting the coin meter box lock configuration (Applicable only if accepting coin).

Issue

Below are instructions to adjust coin lock settings. Refer to your Owner’s Manual for specific details.

Environment

Continental Girbau, Profit Plus, EH020 Commercial Washer

Resolution

In the UCM configuration on the machine board we will adjust the coin/token insertion settings based on the door's status or program selection. It is recommended to set it to "UCM-0," which ensures that coins are accepted regardless of the door's status or the selected program.

The 2 / 4 keys allow the modification of the option displayed.

The 1 key validates the selection on the display and allows the user to access the following programmable

function.

Instructions	Machine Display
Open washer door.
Press and hold the ‘1’ key until 'cod' appears on the display.
To enter the code, press the following sequence of keys: “1,2,3,4,1,2,3,4.” If done correctly 'Pro' appears on the display.
Press the 2 keys repetitively until 'nod' appears on the display.
Then press the ‘1’ key repetitively until 'UCN0’ or ‘UCN1’ appears on the display.
Press the ‘2’ key to change the setting to either UNC2'UCN1' appears on the display.
Press the ‘1’ key repeatedly to return to “Nod”
Press the stop key.