How to wire a Continental Girbau Profit Plus with a KioSoft Reader (PK1G0001) Pulse Kit

Updated
  • Updated on Sep 17, 2025
  • Published on Apr 14, 2025
  • 3 minute(s) read
Prev Next

Summary

How to wire a Continental Girbau Profit Plus with a KioSoft Reader (PK1G0001)

Issue

How to wire a Continental Girbau Profit Plus with a KioSoft Reader (PK1G0001)

Environment

Continental Girbau, Profit Plus

Parts List

Package Number

Package Name

Package Content

PK1G0001

Continental-Girbau Cable With Coin Kit

  • WH1G0001-Continental-Girbau Cable With Coin Cable(x1)

  • AS110096-12VDC Coil Relay(x1)

  • PS100007-Power Adaptor, 12V for CleanReader(x1)

  • WH120006-ACA Power Washer Cable(x1)

  • WH100010-Power Cable to Tap Splice(x1)

  • FS000002-0.250" Tap Splice (x2)

Parts Illustration: 

A collection of multi-colored wires with connectors for electrical applications.

WH1G0001 Continental-Girbau Cable With Coin Cable

PS100007-Power Adaptor, 12V for CleanReader

PS100007-Power Adaptor, 12V for CleanReader

CIT relay with specifications for voltage and current ratings displayed on the body.

AS110096 12VC Relay Coil

Two red tap splices displayed with identification text below them.

Before Wiring

Please adjust the settings on the laundry machine board for coin mode. Below are brief programming instructions. Refer to the programming manual specific to your laundry machine model for detailed menu instructions.

Instructions

Machine Display

Open washer door.

Close-up of a washing machine door showcasing its design and functionality.

Press and hold the number ‘1’ key until 'cod' appears on the display.

Digital display showing a time or measurement with icons for clock and currency.

Press the following sequence of keys: 1,2,3,4,1,2,3,4. Then 'Pro' will appear on the display.

Control panel of a washing machine showing various settings and options for washing.

Press the number “2” key repetitively until 'nod' appears on the display.

Digital display showing numbers and symbols related to a device's status or settings.

Then press the number ‘1’ key repetitively until 'ld-0’ appears on the display.

Digital display showing a numeric value with icons for time and payment options.

Press the number ‘2’ key one time to adjust.

Confirm the setting is on Id-0 as this is for pulse.

OPTIONS MEANING

Id-0 Disabled communication

Id-1 Enabled communication

Digital display showing a numeric value with icons for time and payment options.

Press the number ‘1’ key one time.

Superwash display indicating heavy soil setting with a green light and temperature gauge.

Press the STOP key.

Instructions to push and hold a button for three seconds to stop.

Power Connections:

Please consult the Owner’s Manual, under the installation section, before fully connecting WH120006 or WH100010 & PS100007 Power Adaptor to your laundry machine. Depending on the machine model and voltage, connections may vary. Note: PS100007 Power Adaptor accepts a wide input from 100-240 V – 50-60HZ 0.8A and output of 12V.

Connect the WH120006’s 2-pin connector into the PS100007’s connector.

Then splice the red FS000002 (photo shows blue), WH120006 cable using the provided red wire tab into the machine's power, as illustrated in the reference image below.

Wiring connections and components inside a device, showcasing various colored wires and connectors.

Relay Coil Connections

Connect harness WH1G0001’s spades to the 12VDC coil relay included in the kit. See reference photos below.

Note: The “NC” on the 12VDC coil relay is not used.

Card Reader Connection:

Plug card reader’s data cable into WH1G0001’s card reader connection.

For relay communication, the jumper on the back of the reader must be on "B" side, example show below: 

image.png

Machine Board & Coin Connections

Located and removed the original coin drop connection on machine board, labeled as X8 connection.

Then plug in WH1G0001’s 8-pin connector into the machine board’s X8 connection. This connection is required.

Optional: Take the machine’s original coin drop and plug it into WH1G0001’s coin drop connector. This is only applicable if you are keeping coin as a form of payment.

Coin Meter Lock Configuration

Note: Applicable only if accepting coin

It is recommended to adjust the coin meter box configuration on the machine. This setting is called In the UCM configuration. It will adjust the coin/token insertion settings based on the door's status or program selection.

Digital display showing zero values with checkmark and currency symbols below.

Tokens/ coins accepted only if the door has been closed and the program selected.

Tokens/ coins accepted regardless of the status of the door and the program selected.

A coin slot with a 25 cent indicator and a keyhole for access.

A coin slot with an arrow indicating a 25 cent payment requirement.

It is recommended to set it to "UCM-0," which ensures that coins are accepted regardless of the door's status or the selected program. Below are instructions to adjust settings. Refer to your Owner’s Manual for specific details.

Menu Key Info

  • The 2 / 4 keys allow the modification of the option displayed.

  • The 1 key validates the selection on the display and allows the user to access the following programmable

    function.

Instructions

Machine Display

Open washer door.

Close-up of a washing machine door showcasing its design and functionality.

Press and hold the ‘1’ key until 'cod' appears on the display.

Digital display showing a time or measurement with icons for clock and currency.

To enter the code, press the following sequence of keys: “1,2,3,4,1,2,3,4.” If done correctly 'Pro' appears on the display.

Control panel displaying washing machine settings for different soil levels and temperatures.

Press the 2 keys repetitively until 'nod' appears on the display.

Digital display showing numbers and symbols related to a device's status or settings.

Then press the ‘1’ key repetitively until 'UCN0’ or ‘UCN1’ appears on the display.

Press the ‘2’ key to change the setting to the recommended setting of UCN0.

OPTIONS MEANING

UCN-0 = Tokens/ coins accepted regardless of the status of the door and the program selected.

UCN-1 = Tokens/ coins accepted only if the door has been closed and the program selected.

Digital display showing zero values with checkmark and currency symbols below.

Press the ‘1’ key repeatedly to return to “Nod”

Superwash display indicating heavy soil setting with a green light and temperature gauge.

Press the stop key.

Instructions to push and hold a button for three seconds to stop.

Related articles