The document provides a detailed guide on loading wristband paper and receipt paper. It outlines the steps to load the paper into the printer. This includes inserting the axle into the paper roll, positioning the roll correctly, and ensuring the paper passes through the printer correctly. The guide emphasizes the importance of proper alignment and securing components to ensure functionality. Overall, the document serves as a comprehensive resource for users to successfully install the kiosk and load wristband paper.
Wristband Paper Loading
Please follow the steps below to load the wristband paper.
Insert the axle into the paper roll.
| Put the paper roll on the bracket and ensure the black mark on the paper faces inward.
|
| 
|
Insert the paper into the wristband printer.
|
|
Press down on the two yellow buttons on the sides of the wristband printer, and at the same time lift up the printer cover. Note: Do not lift it from the middle upward when opening the wristband printer cover to prevent hand cuts. There is a blade in the middle part.
|
| 
|
Pull the paper, and pass from behind the roller.
|
| 
|
Then go into the hole between the roller and the fixed bracket. Meanwhile, please ensure this sensor has been moved to the rightmost corner.
|
| 
|
Insert the paper into the seam at the bottom of the wristband printer. Please align the black mark with the sensor at the bottom when inserting the paper.
|
| 
|
Close the wristband cover and the light will be blue. Note: After loading the wristband paper and closing the cover, the device will automatically adjust the wristband paper’s position, which may cause the wristband paper to fold. Please manually and gently pull it to check, to ensure the wristband paper does not get stuck inside.
| |
| |
Correct
Wrong
Not inserted into the seam | Not inserted vertically | Inserted into the seam too long |
|---|
| 
| 
|
|---|
If the printed wristband paper is unclear, as shown in the image 1 below, please power off the printer first, and then use a alcohol pad to gently wipe the roller and the black area above it, like image 2.
Receipt Paper Loading
Please follow the steps below to load the receipt paper.
Insert the axle into the paper roll.
|
|
Place the paper roll onto the bracket.
|
|
Insert the paper into the place between the axle and the black bottom.
|
|
