Login the Android management system with admin account. Navigate to “Advanced setting” section by the main menu at the left side. In this section you can test the movement of the elevator, adjust the elevator height to each layer, test if the layer height is collaborated with the movement of the elevator, etc.
Parameter Settings
Go to number X layer: enter a layer number, and the elevator will ascend to its corresponding height. This function can help you verify whether the elevator's position aligns with the set layer height.
Parameter query: to query the height for each layer.
Parameter Settings: to set the elevator height for each layer. Enter the layer number and its corresponding height (mm). For example, if you set Layer 1 to 100 mm, then select " Layer 1" in the “Go to number X layer”, the elevator will raise to 100 mm to reach layer 1. Click "Set Up" to save your settings.
KioVend TF45E2 User Manual, V1.0.1 / 2025-10-20 Copyright ®2025 KioSoft Technologies